RX BMS-HL

Enclosed in a compact and impact resistant HS-2 enclosure to withstand extreme and harsh environments, the fully configurable and versatile RX BMS-HL receiver offers a combination of proportional/digital outputs and supports RX 14-HL expansion boards. RX BMS-HL proportional outputs may be configured to either PWM or VC or a combination of both. RX BMS-HL offers one (1) Main Contact relay, optional dual E-Stop relay module with feedback monitoring, eight (8) bi-directional PWM/VC outputs, twelve (12) switching relay digital outputs, four (4) 12VDC digital outputs, eight (8) 5VDC digital outputs, eight (8) analog inputs, one (1) CAN Bus interface port, two (2) RF ports and RS232 control cable interface. The RX BMS-HL comes with a quick connect/disconnect 70 pol. connection and provides LED diagnostics for power/operation, transmission signal reception, main contact error and CAN status/error. Typical operating voltage range is 12VDC – 24VDC.

  • Weight

    1720gr (3.8 lbs)

  • Dimensions

    H: 205mm (8.1″)

    W: 246mm (9.7″)

    D: 90mm (3.5″)

  • Frequencies

    4xxMHz, 8xxMHz, 9xxMHz, 1.2GHz and 2.4GHz

  • IP Rating

  • Operating Temperature Range

    -20oC to +70o C

    (-4o F to +158o F)

  • H-Link Configurable